The 2x Suction PoolCleaner™ uses
your existing pump and filter for power. This cleaner plugs
into either your designated suction port or the skimmer. The
2x is
ideal for most average sized pools.
Some of the features that make 2 Wheel POOLCLEANER™ unique:
SELF ADJUSTING TURBINE VANES
All the POOLCLEANER™ cleaners have the patented self-adjusting
turbines, which maximizes the power from the water flow. This
turbine is similar to a paddle wheel with blades that are adjustable.
This feature allows the POOLCLEANER™ to still move at
low suction and low pressure. In addition the folding vanes
of the turbine allow for the easy passage of larger debris
through the cleaner.
STEERING SYSTEM
The 2x Suction POOLCLEANER™ has an internal programmed
steering system, that causes the left wheel to periodically
reverse, allowing the POOLCLEANER™ to turn and then move
into another direction. For the 2x Suction POOLCLEANER™ there
are five different programmed turns ranging from 90 to 450
degrees. This feature allows the POOLCLEANER™ to cover
not only the deep end, but also the shallow end. The POOLCLEANER™ has
no problem with uneven surfaces or strange shapes. It won’t
stick in a corner, or get hung up by a main drain.
ROBUST TIRE TREADS
One look and you will see
that the patented tire treads give the POOLCLEANER™ better climbing ability and obstacle
maneuverability. The tires come with tread wear markers that
show you when to replace your tires. The front tires of the
POOLCLEANER™ have humps (raised treads) that allow the
POOLCLEANER™ to overcome any reasonable obstacles such
as the main drain and uneven surfaces. This makes the POOLCLEANER™ ideal
for all pool surfaces and shapes.
ADJUSTABLE SKIRT
The POOLCLEANER™ has patented adjustable skirts that
allow the cleaner to maintain optimal suction under the machine
even when it encounters obstacles. When the POOLCLEANER™ encounters
an obstacle one (or more) of the skirts will lift up (adjust)
over the obstacle while maintaining suction under the cleaner.
