Close
NEWSLETTER
Email:

Swim Alert Pool Alarm

Maximum Safety - Minimum False Alarms!
Manufacturer: M.G. International
Bookmark and Share

Swim Alert Pool Alarm

The Swim Alert™ poolside detection and alarm system is installed quickly and easily to your pool's edge. Its small size and sleek design combine to allow Swim Alert to maintain a low profile while it provides positive protection.

The wireless remote unit provides a secondary alarm along with status and low battery lights to monitor the system at a glance.

Swim Alert is armed and disarmed at the poolside alarm station with a unique magnetic key. With the unit in "alarm mode" just place the key on the swimmer icon to switch to "swimmer mode". To manually re-arm the system, wait for the water to calm and place the magnet on the swimmer icon again. Or, Swim Alert will automatically re-am itself within minutes after swimmers leave the pool. For safety's sake, Swim Alert cannot be disarmed remotely. The magnetic key system requires pool inspection before disarming.

Effective, dependable, and simple to install and operate, Swim Alert is the superior choice in pool alarms.

Features:

Exclusive AquaSensor sub-surface pulse analysis software

Independent 3rd party tested and certified to ASTM F2008 for pool alarms

Magnetic keys for poolside activation/deactivation

Strong poolside alarm - 100db

Indoor wireless remote alarm (85db)

Effective in pools up to 20' x 40' (800 sq ft.)

Automatic re-arming after swimmers leave the pool

All installation hardware included

Failure signals indicate when alarm is not functional

Up to 100' range - if the range is exceeded, the failure light signals

Low battery and wireless remote out-of-range indicator lights

Batteries included

Chemical and UV-resistant materials of construction

12 month limited warranty

Poolside unit dimensions 9.5" x 9" x 2.5"

UL listed

NSF certified

2 year warranty

Good Housekeeping GHRI tested #1

Swim Alert™ FAQ's

SPECIAL NOTE : Exclusive Aquasensor Technology minimizes false alarms. Upon installation and initial start-up of Swim Alert™ , all pool operating systems should be operating (filter pump, waterfall, fountain, cleaner, etc.). Swim Alertself-calibrates to its environment during the first 10 minutes of operation so it "knows" not to activate its alarm as the result of these normal water disturbances.
Swim Alert
SKU: SA-1
$239.99
: